The rectangular groove guide (RGG) is analyzed by the finite element method (FEM).
本文用有限元法分析了矩形槽波导。
Magnetic fluid seal structure is analyzed by the finite element method (FEM) in this article.
本文利用有限元数值计算方法对磁流体密封结构进行了分析。
An effective vector finite element method (FEM) for analysis of 3d radiation problem is proposed.
提出了一种用于3 -D电磁辐射特性分析的快速有限元方法。
The results from analogy analysis, finite element method (FEM) and experiment analysis are presented.
分别用解析法和有限元方法的计算结果与试验结果进行了比较。
Biomechanical analysis of artificial hip prosthesis was made by nonlinear finite element method (FEM).
并采用非线性有限元方法，进行人工髋关节的生物力学分析。
The analytical result proofed by finite element method (FEM) indicates the same results by two methods.
通过有限元法验证解析结果，两种方法所得结果吻合较好。
Stress of al motorcycle wheel under the service condition was analyzed with finite element method (FEM).
用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。
The temperature and stress fields of a ring structure laser welding are simulated by finite element method (FEM).
对铍环激光束钎焊过程的温度场和应力场进行了有限元模拟。
This paper is based on the research of classical contact analysis and Finite Element Method (FEM) contact analysis.
论文对经典接触计算方法与有限元接触问题计算方法进行了对比研究。
Based on finite element method (FEM), the vibration of power transformer windings caused by electrodynamic force is analyzed.
利用有限元算法分析了三相电力变压器绕组各线匝在不同运行模式下电动力引起振动。
Based on finite element method (FEM), the author compiles the three-dimensional seepage field computation program of RCC dam.
开展碾压混凝土坝渗流场的有限单元法研究工作，编制完成碾压混凝土坝三维渗流场计算程序。
The static governing equations of interval finite element method (FEM) are always transformed into interval equations to solve.
区间有限元的静力控制方程常被归结为区间方程组来求解。
The Monte Carlo method combined with the elastoplastic finite element method (FEM) is proposed to analyze the slope stability problems.
蒙特卡洛随机搜索法与弹塑性有限元法结合，求解边坡稳定问题。
An analysis and calculation of the suspension system of maglev ball by finite element method (FEM) and similarity principle is presented.
提出用有限元法及相似原理来分析、计算磁悬浮球的悬浮系统。
The effects of casing diameter on acoustic log in cased-borehole at free pipe situation are investigated with finite element method (FEM).
用有限元方法研究了自由套管井中不同直径的套管对声波测井的影响。
The numerical result of water temperature of reservoir in Longtan engineering by use of finite element method (FEM) is reliable and accurate.
通过对龙滩工程水库水温的计算结果表明，用有限元法计算水库水温有较高的精度和可靠性。
The variation finite element method (FEM) using the pseudo-potential function was presented for the simulation of transonic rotational flows.
本文运用赝势函数变分有限元方法数值模拟了绕翼型的跨音速有旋流动。
Moreover, symplectic analysis for electromagnetic waveguides provides the theoretical basis for constructing dual finite element method (FEM).
同时，电磁波导的辛分析也是构造对偶有限元的理论基础。
The two-dimensional temperature fields in specific transverse and longitudinal sections are numerically solved by the finite element method (FEM).
结合中医舌诊机理，用有限元法计算了猪舌内部横、纵剖面的二维温度场。
In this paper, we discuss the numerical modeling of complex resistivity anomalies for Cole-Cole dispersion model by the Finite Element Method (FEM).
本文研究了用有限元数值方法模拟柯尔—柯尔复电阻率模型异常规律的问题。
Authors adopted finite element method (FEM) to study the bearing capacity of the studs of cold-formed thin-walled steel residence under vertical load.
采用有限元法对冷弯薄壁型钢住宅墙架柱在竖向荷载作用下的承载力进行了分析。
Due to high computing precision and processing arbitrary structure shape, finite element method (FEM) can become proper method to solution this problem.
具有较高计算精度并能够处理任意结构形状的有限元素法可作为求解该问题的合适的方法。
The transient heat transfer process of piston set-cylinder liner system in gasoline engine was researched with direct coupling finite element method (FEM).
采用直接耦合的有限元分析方法对一汽油机的活塞组—气缸套系统的瞬态传热过程进行了研究。
The flow stress of ferrite/pearlite steel under uniaxial tension was simulated with finite element method (FEM) by applying commercial software MARC/MENTAT.
应用MARC/MENTAT商用有限元软件，对铁素体/珠光体钢的单向拉伸过程进行了有限元模拟。
Finite element method (FEM) was used to partition the area of buried cables with outer heat sources and calculate the temperature field with given cable load.
利用有限元法对有外部热源的直埋电缆区域进行剖分，计算了给定电缆负荷的温度场。
The thesis provides the concept of variable rigid body which simulates the grouting, and simulates the process of shield tunneling with finite element method (FEM).
本文提出了用变刚体模拟注浆体性质随施工过程的变化，用有限单元法模拟盾构法隧道施工的全过程。
By using finite element method (FEM) and by simulating the dynamic and static frequency, the reasons of vibration are clear and then the servo structure is optimized.
通过对直线运动平台的有限元分析和动静态频率仿真，确定了刀架振动的原因，并优化了刀架的结构。
In this paper, Finite Element Method (FEM) is applied to the dynamical analysis on a three-axis turntable and a resonance model is built for bandwidth design purpose.
本文用有限元方法对三轴转台控制对象进行动力学分析，建立机械谐振的频域模型，为带宽设计提供了依据。
The stress and displacement distributions of the bellows under torsion loading are investigated by using both finite element method (FEM) and equivalent cylinder method.
本论文分别采用有限元法和等效圆筒法对波纹管在扭转载荷作用下的应力分布和位移变化情况进行了计算。
The stress and displacement distributions of the bellows under torsion loading are investigated by using both finite element method (FEM) and equivalent cylinder method.
本论文分别采用有限元法和等效圆筒法对波纹管在扭转载荷作用下的应力分布和位移变化情况进行了计算。
应用推荐