The mechanism of the good contact fatigue resistance of the alloy was investigated.
同时，对该合金优良的接触疲劳抗力的来源进行了探讨。
Use of copper material with high mechanical properties and thermal fatigue resistance.
采用紫铜材质，具有较高的机械性能和抗热抗疲劳性能。
The thermal fatigue resistance cuts down with the thermal cyclic upper temperature rising.
随热循环上限温度升高，其热疲劳抗力降低。
If the deformation, stability, fatigue resistance and other aspects may produce adverse effect.
如对变形、稳定性、抗疲劳等方面都可能产生不利的作用。
The fatigue resistance of the scarf weld in the end of the vessel is stronger than that of the butt weld.
其端部斜面焊缝结构的抗疲劳强度比对接焊缝结构高，且不会发生一次性脆性破坏；
It will achieve greater metabolic and neuromuscular efficiency and better fatigue resistance at this pace.
在这个配速下，您的身体将具有更强的代谢效率和神经肌肉效率，以及更好的抗疲劳能力。
The results show that K40S alloy possesses high low cycle fatigue resistance in comparison with X-40 alloy.
结果表明：与传统X-40合金相比，K40S合金具有优异的抗高温低周疲劳性能；
The engineering technique measure, which is treating road bed to increase fatigue resistance, was put forward.
提出了石灰土处理路床区以提高路面结构抗疲劳性能的工程技术措施。
The effect of graphite morphology and alloying elements on thermal fatigue resistance of cast iron was studied.
对石墨形态、合金元素等对铸铁抗热疲劳性能的影响进行了研究。
The material fracture toughness was adequate to ensure development of the full fatigue resistance of the weld detail.
材料的断裂韧性可充分满足焊缝细节疲劳抗力的发挥。
The framework materials must satisfy with fatigue resistance, resistance to impact, resistance to deformation for tires.
骨架材料应满足轮胎所需的耐疲劳、耐冲击、抗变形等性能要求；
The fatigue resistance of complicated welded structure subjected to moving vehicle loads needs to be further researched.
在车辆移动荷载作用下，这种复杂焊接结构的疲劳可靠性有待于进一步研究。
The compound beverage preparation of Matrimony vine and sea-buckthorn has a notable fatigue resistance action on the mouse.
枸杞沙棘复合饮料制剂对小鼠具有明显的抗疲劳作用。
The application of metal ion injection technology for improving metal fatigue resistance and erosion resistance are discussed.
论述金属离子注入技术在改善材料的疲劳、耐磨性、 氧化等性能方面的应用。
Excellent flex fatigue resistance - excellent UV resistance the excellent definition of the sections with of the Extrudes thin.
优良的电线使抵抗疲劳-优良的紫外线抵抗用优良的定义挤出瘦的区段。
The results showed that the proper cryo-treatment can improve the hardness and repeated impact-fatigue resistance of HCCI remarkably.
研究结果表明，适当的深冷处理可显著提高高铬铸铁的硬度、抗冲击疲劳性能。
Effect of machining method or technique on material mechanical properties, such as its Effect on stress state, fatigue resistance, etc.
制造方法及技术对材料机械性能的影响，如对应力状态，抗疲劳性能等的影响。
Hard asphalt mixture have well pavement performace, and have better mechanical performance fatigue resistance and water damage resistance.
硬质沥青具有良好的路用性能，在常温状态下还具有较常见基质沥青好的力学性能、耐疲劳性能和水稳性。
OBJECTIVE: to compare the fatigue resistance of vertical fractured teeth after bonding restoration in two different periodontal healing modes.
目的：比较再植后两种牙周愈合方式下，纵折牙粘结修复后的抗疲劳强度。
The results show that the carbide breaks and the thermal fatigue resistance increase with increasing of quantity of deformation, when it is in 0 ~ 40%.
结果表明：当变形量为0 ~ 40 %时，随变形量的增加，其碳化物破碎程度增加；热疲劳抗力有所提高。
The fatigue resistance of the butt welds can be improved by means of removing the weld reinforcement and designing the weld in the maximum shear stress plane.
去除焊缝余高或将焊缝设计在最大剪应力平面内可明显改善对焊接头的疲劳性能。
The results have shown that the blend of CPE with rubber can be used to manufacture "V"-belt having excellent bending and fatigue resistance and low elongation.
结果表明，氯化聚乙烯与橡胶并用制造出性能良好具有优良的耐弯曲、耐疲劳、伸长率小的V带。
With laser cladding Co-base alloy coatings, the high temperature hardness and thermal fatigue resistance of H13 hot-working die surface were appreciably increased.
H13 热作模具钢表面经激光熔覆钴基合金后显著提高了模具的高温硬度和热疲劳抗力。
The fatigue break down is the main form of die failure. To improve the use life of dies, an approach for increasing fatigue resistance of die material is reviewed.
疲劳破坏是模具失效的主要形式，为了提高模具的使用寿命，综述了提高模具材料疲劳抗力的多种途径。
The results indicated that the microstructure, mechanical properties, oxidation resistance, growth resistance and thermal fatigue resistance were improved obviously.
结果表明，显微组织、抗氧化、抗生长及热疲劳抗力等性能，均有显著的改善和提高。
In high speed wire-rod mill, guide roller is the main consumption tool, excellent wear resistance, adhering steel resistance and hot fatigue resistance are required.
导辊是高速线材轧机上的主要消耗工具，要求高耐磨性、抗粘钢性和热疲劳抗力。
The optical storage properties of both materials were compared such as sensitive spectral range, sensitivity, spatial resolution, fatigue resistance and thermal stability.
比较了两类材料的感光光谱范围，感光灵敏度，空间分辨率，抗疲劳性，热稳定性等性能。
Based on the experiments of shot peening to some specimens, the paper makes an approach to strengthening mechanism and fatigue resistance technology for nodular cast iron.
对试样进行了喷丸处理，进而探讨了球铁材料的强化机制和抗疲劳技术。
The alloying elements such as aluminum, chromium etc, which can increase the heat resistance of cast iron, can apparently increase the thermal fatigue resistance of cast iron.
加入提高抗氧化性的合金元素可显著提高铸铁的抗热疲劳性能。
The alloying elements such as aluminum, chromium etc, which can increase the heat resistance of cast iron, can apparently increase the thermal fatigue resistance of cast iron.
加入提高抗氧化性的合金元素可显著提高铸铁的抗热疲劳性能。
应用推荐