The welding parameters are very important in the explosive welding.
在爆炸焊接中，爆炸焊接参数的确定是非常重要的。
Explosive welding is an effective and economical new technique for armor plates.
焊接来说是一种经济而有效的新技术、新工艺。
The mechanism of explosive welding and rolling of the composite slab is described.
探讨了爆炸焊接和爆炸复合材料轧制的机理。叙述了这种复合材料的用途。
The course of metal explosive welding and its essence of metal physics was described.
简述了金属爆炸焊接的过程和它的金属物理学本质。
The process of metal explosive welding and its essence of metal physics are introduced.
简述了金属爆炸焊接的过程和它的金属物理学本质。
Some applications are described in a new process of explosive welding for the superconducting materials.
综述了爆炸焊接新技术在超导材料焊接中的一些应用。
The effects and influences of these two kinds of mechanical properties are different in explosive welding.
这两种力学性能指标在爆炸焊接中的作用和影响是不一样的。
In the research of explosive welding between tubes, it is necessary to evaluate quantitatively the parameters of the moving tube.
在圆管与圆管的爆炸复合研究中，需要对管的动态参数做定量的估计。
The temperature rise near explosive welding interface is caused by explosive adiabatic compression and abnormal energy deposition.
爆炸焊接界面附近温升是由爆炸绝热压缩和畸形变形能沉积两者造成的。
Some preparation technology, such as the method of water quenching the molten alloy and explosive welding, are briefly introduced.
同时简单介绍了熔体水淬法、爆炸焊接法等制备技术。
For the research of explosive welding between tubes, it is necessary to evaluate quantitatively the parameters of the moving tube.
在圆管与圆管的爆炸复合研究中，需要对管的动态参数做定量的估计。
This paper introduced the distribution and pattern of two conceal defects in explosive welding stainless clad steel plate and their ultrasonic inspection.
本文主要介绍了爆炸焊接不锈钢复合板中两种隐蔽性缺陷的形态、分布规律以及超声波检测。
The gap element method is used to analyse two-dimensional elastoviscoplastic contact problem of circular tubes under explosive welding for the first time.
首次采用间隙元法求解金属圆管在爆炸焊接时的二维弹粘塑性大变形的接触问题，对圆管内包爆炸焊接的全过程作了详细分析。
Although the interface has the features of melt, and pressure welding, the molten and diffusion welding cannot explain the bonding mechanism of explosive welding.
实验表明，爆炸焊接界面虽然具有熔化、扩散和压力焊的特征，但不能用熔焊和扩散焊机理来解释爆炸焊接界面的成因。
Border effect is a common problem existing in explosive welding, how to eliminate the effect becomes one of the key technologies of improving the welding quality.
边界效应是爆炸焊接普遍存在的问题，如何消除边界效应是提高爆炸焊接复合质量的关键。
In multilayer explosive welding of amorphous foils, the regular ripple shape geometry may appear on the surface of foils under certain grancing detonation velocity.
在非晶薄箔的多层爆炸焊接中，箔的表面在一定的滑移爆轰速度下会出现规则的波纹形状。
The bend Angle of the flyer plate was determined by flash X-ray photography during explosive welding and the value coincides with that obtained in the semicylinder test.
通过爆炸焊接过程的闪光X射线摄影，测得了飞板弯折角。其数值与半圆柱试验测得的飞板弯折角基本上相一致。
In this paper, simulation is made of the processing of wavy interface generation in explosive welding using a two-dimensional difference scheme for elastic-plastic materials.
波状界面是爆炸焊接的一个重要特征，利用弹塑性材料的二维有限差分方法模拟爆炸焊接中的波状界面结合过程。
A series of Al-Al explosive welding experiments were carried out to investigate the morphology characters of welding interface under the condition of different charge ratios.
对铝-铝同质金属爆炸焊接进行系列实验，研究不同装药比条件下焊接界面的变化特征。
According to physics performance of two melts, this paper determines the explosive welding window, then obtaines the maximium and the minimium value of explosive weight on per area.
根据两种材料的物理性质确定爆炸焊接窗口，从而确定单位面积药量的最大值和最小值。
This papers using experiment and theory studies and discusses dose of explosive welding, microstructure of interface wave and mechanical properties relation of explosive clad plates.
本论文从实验和理论两个方面对爆炸焊接装药量与界面波的组织形状及复合板力学性能间的关系进行了研究和探讨。
Three measures to solve the problems of boundary effect in explosive welding are put forward and their application conditions, advantages and disadvantagess ave illustrated respectively.
提出了解决爆炸焊接中边界效应问题的三条措施，并说明了各自的适用条件和优缺点。
Throughcalculation of temperature rising callused by them, melt criterion is given, the thickness of melted layer near explosive welding interface with small collision Angle is estimated.
通过计算绝热压缩温升和畸变形能沉积产生的温升，给出熔化判据，定量估计出了在小碰撞角下爆炸焊接界面熔化层厚度。
This paper analysed and calculated the dynamic yielding strength of plastic deformed metal in the bonding zone of explosive welding composite material in the condition of explosive welding.
用比拟的方法分析和计算了爆炸焊接条件下，爆炸复合材料结合区中塑性变形金属的动态屈服强度值。
The paper studied and analyzed the interface wave of clad plate explosive welding used average arranging explosive, then put forward the new technology of unequal thickness arranging explosive.
通过对均匀布药工艺下爆炸焊接复合板的界面波形进行理论分析，提出不等厚度布药的新工艺。
The rolling process is efficient and economical to other types of processes, such as explosive cladding, diffusion welding, etc.
采用轧制工艺生产双金属产品，优于爆炸焊、扩散焊等工艺，是一种十分经济实用的方法。
The rolling process is efficient and economical to other types of processes, such as explosive cladding, diffusion welding, etc.
采用轧制工艺生产双金属产品，优于爆炸焊、扩散焊等工艺，是一种十分经济实用的方法。
应用推荐