Here is the gas discharge tube.
这里是个气体放电管。
He was doing experiments in a gas discharge tube.
实验是在一个气体放电管中进行的。
And what is inside the gas discharge tube is gas at low pressure.
气体放电管里，有处于低压下的气体。
Shell pumps up liquid outlet 8 connected with the discharge tube 9.
泵壳上的液体排出口8与排出管9连接。
And so if he gets the voltage high enough, this gas discharge tube will glow.
如果管中的电压足够高的话，气体放电管将会发光燃烧。
When using discharge tube, please? Screw it onto the outlet of valve, and tighten it.
如使用弯管，请将其套在阀门放料口的外螺纹上，并用手拧紧。
The invention relates to a device for driving lamp and method for driving discharge tube.
本发明涉及驱动灯的装置和驱动放电管的方法。
An ozone generator with glow discharge tube has been developed by using glass as dielectric material.
研制成一种以玻璃作为个电材料的管式辉光放电臭氧发生器。
The ultraviolet light is then converted to visible light by phosphors on the surface of the discharge tube.
紫外线通过放电管屏面上的荧光粉转变成可见光。
The catalyst in the discharge tube and the catalyst at the back of the discharge reactor can be the same or different.
放电管中的催化剂与放电反应器后的催化剂可以相同，也可以不同。
Remove sealing cap from the discharge valve. When using discharge tube, please?screw it onto the outlet of valve, and tighten it.
旋下排液阀的盖子。如使用弯管，请将其套在阀门放料口的外螺纹上，并用手拧紧；
The model which is solved by CFD software uses a set of dynamic differential equations to describe the dynamic process in one discharge tube.
此方法是在建立一系列的控制方程的基础上来描述激光腔内的气体流动过程，并通过CFD软件求解控制方程组。
In this laser the discharge tube with an inside diameter of 8mm and discharge length of 300mm is made of water-cooled segmented aluminium disks.
该激光器以水冷分段铝片组成放电管，内径8毫米，有效放电长度300毫米。
Influence of Ne pressure, input voltage, wall temperature and discharge tube atmosphere on optimal delay of the CVL oscillator - amplifier chain is studied.
本文研究了氖气压、输入电压、管壁温度和放电管气氛对铜蒸气激光器振荡—放大链最佳延时的影响。
A novel heater with a metal pipe was designed which is used encircling the discharge tube of a CuBr laser, resulting in homogeneous distribution of axial temperature.
设计了一种新颖的金属筒式加热器，使气体激光放电管轴向温度分布均匀。
Discharge tube: a closed insulating vessel containing a gas at low pressure through which an electric current flows when sufficient voltage is applied to its electrodes.
放电管：装有低压气体的封闭绝缘容器，当电极有足够的电压时，通过它电流就开始流动。
The estimation for the maximums of the gas temperatures in this tube and traditional sealed discharge tube is given. And a way to lower these temperatures is discussed.
从理论上估算了此种结构和传统的封离式结构中一定注入电功率下工作气体的最高温度，指出了降低该温度的途径。
The optimum input power density is presented by analyzing and calculating the discharge tube gas temperature of a 100 W copper vapor laser to avoid the "black center of beam".
本文讨论了大口径铜蒸汽激光放电的纵向阻抗，给出了阻抗的解析表达式，具体计算了大口径铜蒸汽激光的放电感和电容。
A 3 cm X-band microwave interferometer with a phase-locked amplifier as detector has been used to measure small phase changes as a microwave beam passing through the gas discharge tube.
本文用3厘米微波干涉仪，以锁相放大器作检测器，测量了微波通过气体放电管时所引起的相移。
It is intended to be used for the harmonization of existing or future specifications issued by gas discharge tube manufacturers, telecommunication equipment manufacturers or Administrations.
试图用来协调气体放电管生产厂家、电信设备生产厂家或电信主管部门现行的或将来的规范。
Experiment has showed that the uniformity of discharge of fast axial flow CO_2 laser can be improved by a multiple electrode system and a fluid introducing tude in front of the discharge tube.
实验表明，采用多电极和在放电管的入气端加一整流管能有效改善快速轴流CO_2激光器的放电均匀性。
The detecting circuit of power line touching of the suspension system of DC long-distance reserve power supply of PHS Cell Station was designed by the characteristic of gaseous discharge tube.
利用气体放电管的特性，实现了小灵通基站后备直流远供电源悬浮系统动力线碰触的检测；电路结构简单，实用性强。
A spark discharge between two electrodes produces an "ionised gas tube" in the xenon gas-filled lamp piston through which electric current flows which in turn causes the gas to light up.
在充满氙气的灯柱中的两个电极之间进行火花放电将产生“电离气体管”，电流通过该管流动，从而导致气体发光。
Output characteristics were tested under two diluent injecting methods on a single tube discharge excited infrared multi-band chemical laser by taking DF as a typical case.
以DF为例，在一台单放电管电激励红外多波段激光器上测试了两种稀释剂注入方式下激光器的输出特性。
Numerical solutions of discharge voltage and current pulses on each capacitors and laser tube in the circuit are in good agreement with the experimental ones.
数值求解了电路中各电容器和激光管的放电电压和电流脉冲波形，得到了与实测波形一致的模拟结果。
The discharge current pulse of the laser tube obtained by simulation is consistent with that of experimental measurement on the same condition of circuit parameters.
在相同电路参数时，经模拟得到的放电管电流脉冲波形和实测的波形相一致。
Road tanker vehicles. Metallic tankers for liquid chemical products. Devices effecting discharge by means of pressure: plunger tube, air off - take.
道路油罐车。液态化学产品金属油罐。压力排放装置：管状柱塞，进气孔。
The problem how to discharge air in the double tube underside feed and underside return flow heating system is solved by improvement of system design.
并通过改进系统设计较好地解决了下供下回式热水供暖系统排放空气的问题。
Each EEFL has a tube filled with a discharge gas.
各EEFL具有填充有放电气体的管。
Each EEFL has a tube filled with a discharge gas.
各EEFL具有填充有放电气体的管。
应用推荐