Now select the other Star Diffusion layer that you did not apply the motion blur effect to.
现在选择另一个还没有进行动态模糊效果的星光柔化图层。
This impervious layer or boundary will retard the free diffusion of moisture. This condition is referred to as case hardening.
这一不透气的壳层(或边界层)会阻滞水分自由扩散，这种情形称为表面硬化。
Step 8: Apply the opposite diagonal motion blur to the other Star Diffusion layer.
第八步：在另一个星光柔化图层上使用相反对角线的动态模糊效果。
Step 6: Duplicate the Star Diffusion layer and group the two layers
第六步：复制星光柔化图层并另建包含这两图层的图层组
Double-click on the text of this layer and you will be able to edit the layer name. Name this layer Star Diffusion.
双击这个新图层的文字部分编辑图层名称，并重新命名为星光柔化。
From inner to outside, the composite pipe consisted of alumina ceramic layer, metal transition layer, white cast layer, carbon atom diffusion layer and nodular cast iron layer.
复合管从里到外由氧化铝陶瓷层、金属过渡层、白口铸铁层、碳原子扩散层、球墨铸铁层组成。
It was resulted that the chlorination process of simple oxide is under chemical reaction control, while that of ilmenite is dependent on the ash layer diffusion.
试验结果表明，纯氧化物的氯化过程受化学反应控制，钛铁矿氯化受灰层扩散控制。
A new LT process was established after the preferred Selection of technology parameters, various examinations of properties of the diffusion layer and production practices.
通过诸工艺参数的优选，扩散层性能的多方面考核和生产实践，确定了LT新工艺。
The effect of ignition property on diffusion layer in normal ambient temperature was examined.
研究了几个常用的环境温度下扩散层对点火性能的影响。
It is the compostiton of bulk material and deposition temperature that mainly affects the diffusion layer.
影响扩散层的主要因素是基体材料的成分和沉积温度；
The effects of the voids in the diffusion layer on cyclic oxidation and spalling resistance of aluminized steel was investigated.
研究了热浸渗铝钢扩散层空洞对循环氧化和剥落性能的影响规律及其机理。
The effect of the current density and fuel cell temperature, humidified temperature of cathode and anode, porosity of porous diffusion layer on the results mentioned above are discussed.
讨论了质子交换膜燃料电池运行电流密度和温度、阴极和阳极加湿温度、气体扩散层孔隙率等参数对以上结果的影响。
The decrease of active surface area in the anode caused by CO2 accumulation is reduced through treating the diffusion layer and catalyst layer with PTFE, resulting in increased DMFC performance.
通过对阳极扩散层和催化剂层的疏水处理，降低了阳极产生的CO2导致的催化活性比表面积损失，有效地提高了电池性能。
The paper also briefs the nozzle or moving blade surface hardening treatment technology, including plasma spraying and diffusion layer for preventing the nozzle and moving blade from SPE.
文章还介绍了为预防汽轮机喷嘴和动叶片免受固体颗粒侵蚀所采用的表面硬化处理技术，包括等离子喷涂层和扩散渗层在内；
Properties of nitrided parts have close relation to phase composition of their compound layer and microstructure of their diffusion layer.
渗氮件的性能与渗氮层的化合物相组成和扩散层的微观结构密切相关。
First, Fabrication and optimization of MEA are studied in many aspects, for example hot press parameters, components of catalyst layer and diffusion layer, PEM thickness, etc.
首先，对MEA的制备及优化研究，主要从热压工艺参数、催化层组分优化、扩散层和质子交换膜的选择等方面考虑的。
However, cracks initialized in the diffusion layer between substrate and bond coat when TBCs were tested with low cycle fatigue at high temperature.
而在高温低周疲劳条件下裂纹是在粘结层与高温合金基体的扩散层处。
The interface structure of composite consists of core material diffusion layer, chilling solidified layer, directional growth layer, and cellular granular layer.
复合材料界面结构由芯材扩散层、激冷凝固层、方向性生长层和胞状晶粒层组成。
The nitrided layer of pure iron consists of compound layer and diffusion layer.
纯铁渗氮层则由化合物层和扩散层组成。
Electrons are injected into the floating gate by applying a high voltage to the second impurity diffusion layer in capacitive coupling with the floating gate.
通过在与浮栅电容耦合的第二杂质扩散层上施加高电压对浮栅注入电子。
The calculating results of activation energy show that the diffusibility of nanometer Ni is better than Ni foil in diffusion layer at joints.
通过计算接头处扩散层的激活能可知纳米镍的扩散性能比镍箔的好。
The discharge power density of fuel cell used by carbon fibre cloth diffusion layer are 2.16 and 6.94 times than that of fuel cells used by carbon paper and carbon film diffusion layers respectively.
不同扩散层所组装的燃料电池最大放电功率密度有较大的差别，碳纤维布扩散层所组装的燃料电池最大放电能量分别是碳纸和碳膜扩散层所组装的燃料电池最大放电能量的2 16倍和6 94倍。
Nitriding and oxidation: diffusion layer and oxidation layer improve soldering resistance, adhesion resistance and crack resistance.
氮化扩散层和氧化层：可以提高模具耐溶损性、耐过烧性、耐粘着性和耐热裂性。
A first impurity diffusion layer, which occupies a space within the semiconductor substrate, is provided separately apart from the floating gate by a predetermined distance.
在浮栅的两侧壁上，设置侧壁绝缘膜。第一杂质扩散层设置在半导体基板内，并与浮栅仅离规定的距离。
The results show that the thickness of the diffusion layer increases obviously with the increase of temperature and holding time.
结果表明，扩散层的厚度随烧结温度的提高和保温时间的延长而增厚。
The relationships of chronoamperometric current and diffusion layer with electrolysis time are discussed at microband electrode.
本文讨论了微带电极的计时电流、扩散层与时间的关系；
Phase transformation sequence in diffusion layer and the existence of residual austenite have great effect on the distribution of residual stress.
渗层中的相变次序和残余奥氏体的存在对残余应力分布影响较大。
The front side diffusion layer is then removed.
而后去除正面的扩散层。
Test shows that the depth of residual compressive after chemical heat treatment is correspondent with that of diffusion layer.
试验表明，化学热处理后残余压应力的深度往往与渗层深度相一致。
Test shows that the depth of residual compressive after chemical heat treatment is correspondent with that of diffusion layer.
试验表明，化学热处理后残余压应力的深度往往与渗层深度相一致。
应用推荐