In this paper, the BEM is applied to the cylindrical shell.
本文将边界元法应用于圆柱壳。
The shallow cylindrical shell is a typical type of structure of aircraft.
圆柱形扁壳是飞行器的常见结构形式。
There is a maximum critical value in the cylindrical shell of certain dimension.
研究发现，一定尺寸的圆柱壳有一个最大临界值。
Water Ring Vacuum pump cylindrical shell to install a pump eccentric impeller-shaped teeth.
水环式真空泵的圆柱形泵壳内安装一个偏心的牙状叶轮。
There are two resonance frequencies when the rotating thin cylindrical shell vibrates linearly.
旋转的薄壁圆柱壳在线性振动时，有两个共振频率。
This article discusses the dynamic computation of the closed cylindrical shell under impact load.
本文讨论闭合圆柱形壳体在冲击荷载作用下的动力计算。
The axisymmetric problems of a thick-walled elastic circular cylindrical shell with finite length are studied.
本文研究了一个弹性有限圆柱厚壳的轴对称弯曲问题。
The analysis for free vibration of ring-stiffened circular cylindrical shell with variable thickness was presented.
分析了环肋变厚度圆柱壳的自振特性。
The design of water tank using the axisymmetrical cylindrical shell theory with moment and in situ tests are presented.
利用轴对称圆柱壳有矩理论进行水池设计，并进行了现场测试。
The experimental investigation on vibration characteristics of thin cylindrical shell with axial symmetry has been performed.
本文对轴对称薄壁壳结构的振动特性进行了试验研究。
To learn the buckling of thin-wall cylindrical shell under axial impact is helpful to the design of energy-absorbing structure.
了解轴向冲击下薄壁圆柱壳的屈曲行为，有助于进行吸能构件设计。
In last, the approximate formulas of computing buckling pressure according to its "equivalent cylindrical shell" is also given.
最后还给出了按其“相当的正圆锥壳”计算临界压力的近似公式。
The exact solution of infinitely long circular cylindrical shell with one end fixed, the other end loaded by a couple is obtained.
用解析法求得了无限长园柱壳一边固定，另一边受力偶作用的精确解。
Approximating the unit of coating as hollow viscoelastic cylindrical shell, an eigen equation of the axisymmetric waves is derived.
将覆盖层单元近似为粘弹性圆柱管，导出轴对称波的特征方程。
By using of effective mobility power flow method, vibration level and radiated power level of a element cylindrical shell are studied.
利用有效导纳功率流法研究了基本圆柱壳体的表面振级和声辐射功率级。
Stability of the braid composite cylindrical shell is a complicated problem which needs to be urgently solved in aerospace industry now.
在航天工业中，编织复合材料圆柱壳的稳定性问题是一个比较复杂但又迫切需要解决的课题。
The stress displacement equations of cylindrical shell with initial imperfection are deduced on the basis of definitions of imperfection.
基于初始缺陷的定义式，推导出有初始缺陷的圆柱壳的几何方程。
The formulas of internal force, displacement stress was deduced according to the general mechanics theory of the ringent cylindrical shell.
利用开口圆柱壳的一般力学原理和方法，推导出壳体的内力、位移和应力求解格式。
The dynamic buckling behavior of the thin-wall cylindrical shell is more complicated than that of the thick shell due to its more unevenness.
由于薄壁圆柱壳比厚壁圆柱壳的不均匀性更大，薄壁圆柱壳的轴向动力屈曲比厚壁复杂得多。
The dynamic problem of constrained layer damping (CLD) cylindrical shell is investigated by the distributed parameter transfer function method.
采用分布参数传递函数方法对约束层阻尼（CLD）圆柱壳进行了动力学分析。
This paper presents the application of unbonded prestressed concrete technique to cylindrical shell with big diameter through an engineering case.
通过工程实例，介绍无粘结预应力混凝土技术在大直径圆柱壳中的应用。
Based on Flugge shell theory, the equations of free vibrations of a orthotropic circular cylindrical shell under hydrostatic pressure are obtained.
本文对静水压力作用下正交各向异性圆柱壳的自由振动特性进行了分析。
This paper studies the influence of structural stress parameters on the noise radiation of a stiffened cylindrical shell with different rib Numbers.
对加筋圆柱壳由于肋骨数目改变所引起的结构应力参数变化对辐射噪声的影响进行了探索。
It can be predicted that the cylindrical shell structure is better than the plane structure in reducing welding residual stress through local loading.
因此可以预见，对于应用局部加载降低结构体焊接残余应力，柱壳结构要比平板结构效果更好。
The similarity between equivalent stress distribution around the holes in cylindrical shell and its plate model is shown through finite element analysis.
有限元分析表明，开孔圆柱壳与其相应的平板模型在开孔附近的等效应力分布非常相似。
Double concentric cylindrical shell with solid floor and added longitudinals on the pressure tank shell is a very good structural form of new pressure tank.
指出了液舱壳板加纵骨的全实肋板同心双层圆柱壳是一种优良的耐压液舱新型结构型式。
This paper presents the experiment and theoretical analysis of plastic buckling of rib and ring stiffened cylindrical shell under uniform external pressure.
本文进行了纵环加筋圆柱薄壳在均布外压作用下的屈曲试验和分析研究。
The present paper is concerned with a problem of limit analysis of thin cylindrical shell with closed ends and different thicknesses under internal pressure.
本文研究充内压端封闭异厚度薄圆柱壳的极限分析问题。
The influences of multi-openings with different shapes on a casing-cement cylindrical shell are studied in this paper, combined with practical engineering of oil Wells.
结合油井试采工程实际问题，研究了圆形和椭圆形两种形状的多个射孔对套管-水泥环结构强度的影响。
The influences of multi-openings with different shapes on a casing-cement cylindrical shell are studied in this paper, combined with practical engineering of oil Wells.
结合油井试采工程实际问题，研究了圆形和椭圆形两种形状的多个射孔对套管-水泥环结构强度的影响。
应用推荐