By using examples This paper discusses application of semiconductor converter technique in industry electrification and automation.
本文通过实例论述半导体变流技术在工业电气化及自动化中的应用。
The converter technique, which has been widely used in various industries, brings about huge improvement to people's production and life.
变频技术已广泛应用于各行各业,给生产和生活带来了极大的改善。
The paper presents a hydraulic volumetric speed control system based on converter technique, laying stress on the introduction of the structure and working principles of the system.
本文提出一种基于变频技术的液压容积调速系统,重点介绍系统结构、工作原理,并建立了数学模型进行分析和仿真研究。
We have successfully researched and developed FUSAN flat top tower crane, this tower crane adopts the most advanced world technology, all three mechanisms adopt converter technique.
我们成功地研制和开发FUSAN平板塔式起重机,该塔式起重机采用最先进工艺,采用三种机制转换器技术。
This paper introduces the features of the frequency control technique of AC motor, and expounds the present situation, developing trends and applicability of the converter technique.
介绍了交流电动机变频调速技术的特点,阐述了变频技术的现状和发展趋向及其应用领域。
Moving hot washing truck made by us use converter technique and plunger displacement pump. Its pressure and flow rate can 'be adjusted easily. It can do hot washing anywhere at any times.
研制的活动热洗车利用变频技术和柱塞泵,具有压力及排量可调节的特点,可以随时随地实施油井热洗。
An often cited technique is to add a dummy value converter and then set a break point within it.
另一个常用的技术是增加一个假值转换器,然后在其中设定断点。
The converter has a good tradeoff between conversion speed and conversion precision. It is a 1.5-bit per stage with 9 stage and digital correction technique.
本设计为兼顾模数转换器的速度和精度,采用数字校正技术,以每级1.5 位的9 级流水线结构实现。
The converter USES a high order MASH noise shaping technique and a digital decimation filtering part consisting of comb filters and cascade of half band filters.
该转换器采用了高阶MASH噪声成形技术,而其数字抽取滤波部分则由梳状滤波器与级联的半带滤波器构成。
Soft switching technique could improve the circumstance of the power switch, reduce the losses and increase the efficiency of the converter.
软开关技术能够有效改善功率开关管的工作环境,降低开关损耗,提高变换器的效率。
To reduce the power dissipation and chip size of digital calibration circuits of pipelined analog-to-digital converter (ADC), a new statistics-based background calibration technique is presented.
为了降低流水线模数转换器中数字校准电路的规模和功耗,提出了一种新的基于信号统计规律的后台数字校准技术。
With this technique, the effect of equivalent high switching frequency converter has been obtained with low switching frequency converter.
提出了基于载波组合相移技术的电流型电力有源滤波器,在较低的开关频率下实现了等效的高频载波效果。
In the foundation treatment for the converter of main plant building of large scale steel mill, it is the first time to replace conventional pile foundation design by grouting technique.
在大型炼钢厂转炉主厂房的地基处理上,首次引进注浆技术取代常规桩基设计。
The technique of audio frequency slag melting has been exploited for top and bottom combined blown converter in 150 t combined blowing converter of Tangshan Iron and Steel Company.
在唐钢150t复吹转炉上开发出适用于百吨以上顶底复吹转炉的音频化渣技术,并根据音频曲线实现了转炉吹炼操作的量化分级管理。
The converter use ZVS-PWM technique and the average current mode control method, and the use of maximum current flow to achieve automatic multi-parallel current.
该变流器应用ZVS - PWM技术和平均电流模式控制方法,并采用最大电流自动均流法实现多机并联均流。
Moreover, the size and weight of the converter can also be reduced by interleaving technique and increasing the frequency.
通过交错控制和提高开关频率,大大减小了变换器的体积和重量。
Based on the mathematical model, we adopted topological description series and the technique of fault equivalence disposal to calculate all kinds of faults of the new converter transformer.
基于所建立的数学模型,采用拓扑描述串和故障等效处理技术来计算新型换流变压器的各种故障。
The cascade multilevel converter based on CPS-SPWM technique has both of the advantages, so it has attractive perspective in large power application.
基于CPS -SPWM技术的级联型多电平变流器结合了二者的优势,在大功率电力电子装置中有良好的应用前景。
The charging technique with L-C constant-current converter is adopted, and the repeated charging and discharging process of the device is controlled by voltage feedback.
研制了一种检测氧化锌避雷器阀片的重复频率充放电装置,采用L C恒流充电技术,通过电压反馈法控制充放电运行过程。
A novel multilevel matrix converter is proposed, and its topology configuration, operating principles and space vector modulation technique are introduced.
提出了一种新颖的多电平矩阵变换器,介绍了其拓扑结构、工作原理和空间矢量调制技术。
One cycle control technique is applied in cascaded multilevel converter to improve its performance.
将单周控制技术用于级联多电平变换器提高其控制性能。
Power factor correction (PFC) technique based on SEPIC converter is researched in this paper.
本文对基于SEPIC变换器的功率因数校正技术进行了研究。
To lower the requirements of the wavelength converter performance, Limited-range wavelength conversion technique was employed in some papers.
为了降低对波长转换器性能的要求,一些文献还提出在网络中配置只具有有限范围的波长转换器。
A novel cascade multi-level converter with carrier phase-shifted SPWM (CPS-SPWM) technique is proposed in this paper. This converter has good prospect in engineering due to its perfect performance.
本文提出的基于载波相移穴CPS -SPWM雪技术的级联型变流器同时具有CPS - SPWM技术与多电平变流技术的优点,因而有广泛的工程应用前景。
The feasibility of continuous-adjustable output converter based on soft-switching has been analyzed by AC analytical method and EDF technique and proved by simulation and experimental results at last.
最后对串并联谐振变换器进行了仿真和试验,结果表明实现了软开关条件下变换器输出的连续可调节。
The active clamp ZVS-PWM forward converter has been answered for with the merits of the soft switch technique and the magnetic reset technique.
有源钳位z VS - PW M正激变换器可以适应这一发展趋势,因为它具有软开关和磁芯自动复位功能。
The CO shift reaction uses heat transfer technique by the sections of shift converter to remove heat.
CO变换反应催化剂床层排热多采用变换炉段间换热方式。
The principle of cascade H-bridge converter is analyzed. Variable-Frequency Carrier Bands PWM(VFCB-PWM) technique is discussed. Cascade H-bridge converter based on VFCB-PWM technique is proposed.
分析了级联H桥型变换器的工况,讨论了载波带频率变化的PWM(VFCB-PWM)技术,提出了基于VFCB-PWM技术的级联H桥型多电平变换器。
China has done deep research on the dry technique and in 2006 creatively developed the technique which is perfectly fit for Chinese converter flue gas.
我国在转炉煤气干法净化回收技术方面已经做了全面深入的研究,并于2006年开发出了完全适合我国炼钢转炉的煤气干法净化回收系统。
The application of the ZVS switching technique on full-bridge converter is discussed.
阐述了零电压开关技术(ZVS)在移相全桥变换器电路中的应用。
应用推荐