The CAM follower rides against a push rod, which pushes against a rocker arm.
凸轮挺杆推动控制摇臂的推杆。
A clutch mechanism for a rotary impact tool comprises a CAM ball and a CAM follower.
本发明公开了一种用于旋转冲击工具的离合机构，该离合机构包括凸轮球和凸轮从动件。
In this arrangement, the CAM lobes push against round metal cylinders called CAM follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
The cam follower always contacts the cam surface at a single point or along a single line.
凸轮从动总是接触凸轮表面的单点或沿一条直线上。
The first and second CAM follower wall means are disposed so as to oppose one another, e. g. back to back.
第一和第二凸轮随动件壁装被设置为彼此相反，例如背对背。
The CAM follower includes a raceway for allowing the CAM ball to travel along a surface of the CAM follower.
该凸轮从动件包括用于使所述凸轮球沿凸轮从动件的表面行进的滚道。
As the lobe of the CAM comes up under the CAM follower, it pushes the CAM follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
As the lobe of the CAM comes up under the CAM follower, it pushes the CAM follower upward (away from the camshaft).
在这种布置中，凸轮凸角推动凸轮挺杆。
Harmonic syntheses of CAM mechanism is to use the sum of limited terms of harmonics as the transmission function of a CAM follower.
采用有限项谐函数作为凸轮机构从动件运动函数，称之为凸轮机构谐综合。
The function of the cam follower directly influences the economic value and reliability of an internal combustion engine, so the cam follower is studied in this paper.
凸轮挺柱机构是内燃机的重要零件副之一，其性能的优劣直接影响到内燃机的经济性和可靠性。
The CAM contour curves are reconstructed by NURBS, and a rapid reverse design method for spatial CAM follower motion specification via motion simulation is also studied.
利用NURBS实现了凸轮轮廓曲线的重构，并给出基于运动仿真实现迅速反求空间凸轮机构从动件运动规律的方法。
Based on the measured data of a CAM, the computer can analyze and find out the movement regularity of the CAM follower lever, thus obtaining the theoretic profile of the CAM.
提出了根据凸轮的测量数据，通过计算机分析处理，找出推杆从动件的运动规律，获得凸轮的理论轮廓曲线的方法。
Based on meshing theory, a formula is derived for calculating index error of worm-type CAM follower (i. e. Tindex plate) under influence of actual worm-type CAM profile and dimensions.
以啮合理论为基础，导出了蜗式凸轮机构从动件(即分度转盘)在凸轮实际轮廓和实际机构尺寸诸因素的影响下，分度误差的计算公式。
The mathematical model for the motion inverse seeking of paper separation mechanism was constructed, and the motion laws of CAM follower and of paper separation suction nozzle were obtained.
构建了分纸机构运动反求的数学模型，得到了从动件及分纸吸嘴的运动规律。
System calculations is often used in designing CAM and follower mechanisms and in analyzing their performance.
系统计算法常常用于设计凸轮和从动件机构以及分析其特性。
This paper presents a new method to design the disk CAM with concave follower, and find the relationship between the new kind of CAM and the formal ones.
本文找出了凹圆弧底直动从动件盘形凸轮与原有凸轮之间的区别与联系，并统一了原有凸轮的设计方法。
An analytical design method of disk CAM mechanism with oscillating roller follower is introduced.
介绍了摆动滚子从动件盘形凸轮机构设计的解析法。
The law of motion of follower is often described by the compound law of motion to get the better operational performance in modern CAM design.
在现代凸轮机构设计中，为获得良好的使用性能，从动件的运动规律常常采用复合运动规律。
This paper presents a new method to design the disk CAM with concave follower, and finds the relationship between the new kind of CAM and the formal ones.
找出了凹圆弧底直动从动件盘形凸轮与原有凸轮之间的区别与联系，并统一了原有凸轮的设计方法。
In this paper, the calculating method for the contact stress of plate CAM mechanism with translating roller moving follower is presented, and some examples are given.
本文详细分析了对心滚子移动从动件盘形凸轮机构接触应力的计算方法，并给出具体计算例题。
To analyze the cause of design error on Oscillating follower Cylinder Cam Mechanism, building the mathematics model, and affording the equation to conform to actual motion rule.
分析了摆动从动件圆柱凸轮机构误差产生原因，建立了数学模型，并给出其实际运动规律的方程。
This method could only be applied to the cam with constant speed moving follower.
该方法只适用于从动件为等速运动规律的凸轮机构。
In this paper, a new type of disk CAM mechanisms whose follower has concave circle arc bottom is developed.
本文根据赫兹应力理论，提出一种凹圆弧底从动件的盘形凸轮机构。
With the help of complex number operation, the author has developed a method for designing the contour of a CAM whose follower keeps a general plane motion.
本文利用复数表示法，得出从动转子中心作平面一般运动情况下的凸轮廓线的设计方法。
On the base of Hertzian stress theory we developed a new kind of disk CAM mechanism whose follower has concave circle - arc bottom.
根据赫兹应力理论，提出了一种从动件接触面形状为凹圆弧底的新型盘状凸轮机构。
The paper presents a new method for synthesizing and optimizing the follower motion with complex characteristics for high-speed CAM mechanism based on the piecewise polynomials.
针对具有复杂运动特征的高速凸轮机构从动件运动规律，提出用分段多项式进行综合和优化的新方法。
In this paper, the pressure Angle and minimal radius of curvature of CAM mechanism with swinging roller follower are discussed in details.
本文对摆动从动杆盘状凸轮机构的最大压力角和最小曲率半径问题进行了详细的讨论。
The lower pairs were substituted for the higher pairs in order to study the specific properties of the disc cam with the circular profile and the follower attached to the roller.
并以最大无量纲速度和加速度为标准，将凸轮机构从动件常用运动规律特性与该圆弧凸轮的从动件运动规律特性加以比较，指出其适用场合为中、高速轻载。
The double simple harmonic motion of the tightening weft cams follower and the mathematical equations of the CAM were established.
推导出适合打纬共轭凸轮机构的双简谐运动规律和共轭凸轮廓线的坐标方程。
With cylindrical coordination, this paper establishes the contour surface equations and pressure Angle formula of the conical grooved CAM with translating conical roller follower.
借助柱面坐标，建立了圆锥滚子直动从动件圆锥槽凸轮的廓面方程和压力角公式。
应用推荐