The settings of each motor at this instant are stored in a control to determine the calibration point when the upper grilling surface is level.
当上烤制表面是齐 平的时候，每个电动机此时的设置值被存储在控制器里用来确定校正点。
At that point the battery has been sufficiently drained for calibration.
这时电池就已经充分耗尽到校准点。
Important factors include the sampling rate, the zero point of pressure sensor, and the correct calibration of sensor, the revised program and algorism may improve the precision of measurement.
如实时设定的实际采样率和压力传感器零点、对传感器校准与标定的正确性等诸因素均可影响实测数据的精度。
In this paper, binocular stereo vision for the detection of the CCD camera calibration, feature point extraction and matching feature points have been studied in detail.
本文主要对双目立体视觉检测技术的CCD相机标定、特征点提取和特征点匹配等内容做了详尽地研究。
According to the influence of degenerate point configurations of projection matrix, the number of calibration correspondences and the track of users head are improved.
根据对投影矩阵的退化点结构的影响，改进了选取标定的对应点个数和用户头部的运动轨迹。
The importance of the downward detection angle of the second generation infrared machine is described. And the calibration method is analyzed and calculated from the mathematical point of view.
介绍了红外二代机下探探测角度的重要性，并从数学角度对其校准方法进行了分析和计算。
The single point calibration is the most regular check-up in environmental air automatic monitoring system.
单点校准法是环境空气自动监测系统中最常规的例行检查。
According to image of linear edges in calibration object, the distortion coefficient and position of principal point of imaging system can be calculated by optimization method.
利用标定物直线边缘的图像，并运用优化的方法来计算成像系统的畸变系数和主点位置。
This combined the camera calibration with the border and special point detection technology, and implemented a kind of steel rail profile abrasion measurement system.
本文还将相机标定、边缘与特征点检测技术、图像匹配技术结合起来，实现了钢轨剖面磨耗的钢轨磨耗测量系统。
A linear camera calibration method with vanishing point and the invariance of cross-ratio is proposed.
在已知一个消隐点的情况下，利用交比不变性及消隐点的知识对摄像机进行标定。
In these applications, can be used multi-point calibration method to get the best results.
在这些应用中，可以采用多点标定法来得到最理想的结果。
To achieve the precise amount of non-linear simulation and rapid detection, linear analog multi-point calibration detection method is proposed.
为实现非线性模拟量的精确、快速检测，提出了非线性模拟量的多点定标检测方法。
The calibration coefficients calculated by this multi-point calibration method can increase the measurement accuracy, decrease the errors and improve the logging data quality.
采用此多点刻度法计算的刻度系数，可以提高测量精度，降低误差，改善测井资料质量。
Conclusions: to make sure that assay result of routine biochemistry items is more accurate, we advise to adopt multi-points calibration model in place of traditional single-point calibration model.
结论：在常规生化定量测定法中建议采用多点校准多元回归模式取代单点校准模式，以提高临床实验室检测结果的准确性。
Then, by using the camera calibration parameters, 3D coordinates of each feature point in the machine coordinate system were calculated.
由摄像机标定参数，进一步计算出各特征点在机器坐标系中的三维坐标；
In order to describe the non-linear relations between 3d geometry and stereo image point in the binocular vision, traditional calibration method involves many complicated mathematical models.
为了描述双目视觉中三维空间物点坐标和两个摄像机像面像点坐标间的非线性关系，传统的标定方法需要建立复杂的数学模型。
Secondly, a new method with scene constraint and the constraint of principal point for camera self-calibration based on the linear iteration is presented.
其次，提出了综合利用空间平行线约束和相机主点位置约束的线性迭代自定标方法，提高了相机自定标的鲁棒性。
The tool uses a specific calibration target for the individual calibration of 3D point clouds before realizing real measurements in 3D.
在真正的3D测量实施之前，Metric 3D工具使用一个指定校准目标对3D点云的各个数据进行特定校正。
The main point of this study is to looking for calibration of methanol or ethanol applied in SI and CI engine.
本课题主要针对醇燃料（甲醇和乙醇）应用在压燃式和点燃式发动机上的标定研究。
Press "-", and the image will automatically run down to the zero-point calibration position and then stop.
按“-键”画面自动下行到零点校正位并停止运行。
This paper describes the issues in terms of time synchronization in satellite navigation systems, satellite navigation device zero point, and device zero point calibration.
概述了卫星导航系统的时间同步问题和卫星导航的设备零值及其标校问题。
Additionally the linearity of the measurement by PMS has been verified by analyzing CO and CO2 at various concentrations based on a single-point calibration.
图五所示为采用过程质谱基于单点校正在不同浓度测量CO和CO2的线性度的测试结果。
The calibration of dew point hygrometer and micro-moisture meter in ultra-low humidity range was done by using precision dew point hygrometer and low range humidity generator.
利用精密露点仪和低露点湿度发生器对超低湿露点仪和微量水分仪进行了校准，并对超低湿情况下露点标准值的准确度进行了分析评估。
A probe of zero calibration, a two-point calibration function, the system error of automatic correction;
具有探头零点校准、两点校准功能， 可对系统误差进行自动修正；
The two-point calibration method is adopted.
采用两点电位测量法。
The adjusting of flow meter is automatic when the method of measuring fixed-point liquid level is used on liquid flow calibration facility, and the data can be gathered and processed automatically.
定点液位测量提高了流量标准装置的工作效率，能够使流量标准装置直接检定腐蚀性液体流量计，并且可以实现校准过程的自动化、数据的自动采集和自动化管理。
The related researches of vanishing point have been focusing on its automatic detection and camera calibration for a long time, however there were few researches on its error distribution.
长久以来灭点的研究都集中在自动检测和相机检校方面，然而对其本身的误差分布研究并不多。 针对直线交会灭点时存在的闭合差问题和灭点的误差分布问题，进行深入探讨。
A nonlinear calibration method based on vanishing-point theorem is applied to calibrate the system and the image features of a free-form surface are enhanced by projecting arrays of dots.
基于灭点理论法进行了系统的非线性标定，采用投射光斑法增加自由曲面的图像特征；
Chromatographic technique was introduced together with single external standard and single point calibration adopted, in order to determining impurity components of hydrogen;
介绍了运用色谱技术，采用单外标物、单点校正法，测定氢气中的杂质组成；
Chromatographic technique was introduced together with single external standard and single point calibration adopted, in order to determining impurity components of hydrogen;
介绍了运用色谱技术，采用单外标物、单点校正法，测定氢气中的杂质组成；
应用推荐