In addition, a calibration circuit is incorporated in the sensor circuit for providing calibration current, which is used to generate calibration parameter.
另外，传感器电路中包含了一个校准电路来提供产生校准参数的校准电流。
Reduction of the catchment area could increase the sensitivity of other parameters, providing better condition for parameter calibration.
减小汇水区面积的不确定性可提高其他参数的灵敏度，有利于参数的有效识别。
The model provides a new method and means for the geometrical parameter calibration, sensitivity analysis and error compensation of the machine tool.
此模型为串并联型机床敏感性分析、误差补偿和几何参数标定等提供了新的方法和手段。
Through parameter calibration and model validation, model can be adapted to morphogenesis and LAI simulation for different varieties and management practice.
通过对模型参数的校正和核实，使模型适应于不同类型品种的形态发生和LAI动态模拟。
However, the calibration of the dimensionless stress intensity factor, which is an important mechanical parameter, is still in question.
但是，该试样的重要力学参数即无量纲应力强度因子的标定尚有问题。
The problem of parameter estimation and array calibration with sub-Nyquist sampling is studied in this doctoral dissertation.
论文主要研究时间（频率）、空间欠采样条件下的参数估计与阵列校正方法。
Static sensor calibration process and procedure is introduced. A device for automatic sensor parameter calibration and power-fail protection based on 51 single chip computer was designed.
介绍了传感器静态标定过程及步骤，并设计了一种基于51单片机的传感器参数自动标定及掉电记录保护装置。
Software consists of system initialization, self-test, measurement range selection, balance parameter setting, calibration coefficients determining, access programs of keyboard and LCD.
软件部分主要包括系统的初始化、自检、量程选择、平衡参数设置、定标系数确定、动平衡测量、键盘中断处理、彩色液晶显示等模块。
To effectively realize the camera calibration on a position topography measurement, a multi-camera parallel calibration method is proposed based on a camera intrinsic parameter model.
针对阵地地貌测量重构中的相机参数标定问题，基于相机的内参数模型提出了一种多相机并联阵地地貌测量标定方法。
A linear method for camera parameter calibration is studied by the mathematical model of camera on the basis of projective theory.
利用透镜成像理论建立摄像机数学模型，提出了一种线性求解摄像机内外参数的方法。
In this paper, a new self calibration method is present to identify the kinematic parameter of robot manipulator.
针对该测量系统的特点，提出了一种新的自标定方法来识别机器人的运动学参数，并设计了专用的实物基准。
It is a parameter, associated with the result of a measurement (eg a calibration or test) that defines the range of the values that could reasonably be attributed to the measured quantity.
它是一个与测量结果相联系(比如校验或者检测)的参数，定义了所得值的范围，可能跟检测数量有关。
Finally, three methods have been proposed for model calibration, namely, index comparison, parameter comparison and curve fitting.
最后，提出了三种方法对模型进行校验，分别是指标对比法、参数对比法、曲线拟合法。
Calibration loop consists of calibration target establishment, evaluation of the default parameter values, sensitivity analysis and calibration of model parameters.
校正循环体包括了校正目标的确定、默认参数值评价、参数敏感性分析、参数校正等步骤。
The state estimation of water distribution system is systematically summarized, which includes parameter estimation, calibration assessment and data (sample) design.
系统地总结了供水管网状态估计的研究内容，包括参数估计、校核评估、数据(样本)设计。
If both of the input and output data in in-situ calibration contain have noises, the result will be a biased one when the traditional least squares method is used for parameter identification.
在原位标定输入输出观测数据均含有噪声的情况下，应用传统的最小二乘法进行参数辨识将会得到有偏的结果。
A model for evaluating the structure rationality of road networks is established, followed by parameter calibration.
建立了路网级配结构合理性判定模型，并对模型参数进行了标定。
In projected grating method used for measuring 3d surface topography, parameter calibration is the most important factor which affects the measurement precision.
应用投影栅线法在现场检测三维物体的形状时，参数标定是影响测量精度最重要的一个因素。
This paper introduces a kind of integrative parameter calibration system in the field.
介绍了一种基于现场校准的动静载综合参数校准装置。
The 3d motion parameter measurement of a rocket motor nozzle is a premiss for accurately controlling the nozzle, and the calibration equipment is the key to ensure motion testing at a high precision.
火箭发动机喷管三维运动参数的测试是对其精确控制的前提，其校准装置是保证测试精度的关键。
A linear approach for camera parameter calibration is proposed.
提出了一种线性求解摄像机内外参数的方法。
Abstract: Brief voltage drop simulator characteristics, calibration and parameter calculation.
摘要：简述电压跌落模拟器特性，校准和参数计算。
Study on the tool calibration with tool calibration principle, method and parameter.
研究了仪器刻度原理，定义了刻度实现方法和设计参数。
Quantitative Modeling of Project Dynamics, Model Calibration and Parameter Estimation, Simulation Execution, Industrial Examples.
数值模拟项目动态，模型校验和参数估算，模拟执行，产业例子。
GA is an appropriate choice to solve the problem of multi-parameter, large-scale and non-linear complex function optimization like camera calibration.
遗传算法非常适合于解决摄像机标定这类多参数、大范围、非线性的复杂函数优化问题。
Monthly discharge was simulated based on the optimal parameter sets for both calibration and validation periods, and compared with observed values for effectiveness evaluation.
根据最优参数值模拟了率定期和验证期兴山水文站的月径流量，并与实际观测值进行了对比评估。
Using this model to calibrate Xinanjiang model can directly assess the model performance, calibrate the model parameter automatically, and significantly improve the efficiency of calibration.
采用该方法进行新安江流域水文模型的参数优选，可以直接对模型性能进行全面评价，自动率定模型参数，显著提高了模型率定效率。
This paper studies the calibration method of structure parameter of Parallel 6-dof Docking Platform (PSDP).
对并联六自由度对接平台的结构参数标定问题进行了研究。
In this paper, we studied and analyzed RSSIbased distance estimated model, and provide a parameter calibration method which in specific to indoor environmental applications.
通过对RSSI测距模型进行分析，并提出一种针对室内环境的参数修正方案。
Based on the four-step demand model with a feedback loop, a feedback mechanism with on-line travel time parameter calibration is proposed.
以引入反馈机制的四阶段需求模型为基础，提出带有在线出行时耗参数标定的反馈机制。
应用推荐